Table of Contents
Advertisement
NOTE
To switch the dino back into a vehicle, follow the above steps in
reverse order.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
3. Remove the batteries if the unit will not be in use for an extended
4. Do not drop the unit on hard surfaces and do not expose the unit
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back On. The unit should now be ready to use
5. If the unit still does not work, insert a new set of batteries.
195060 IM.indd 7
sources.
period of time.
to moisture or water.
again.
7
2020/4/10 10:13:10
Advertisement
Table of Contents
