Cps Programming/Flashing Setup Ribless; Cps Programming Setup With Rib (Telco Connector) - Motorola Commercial Series Basic Service Manual

4-2
3.0

CPS Programming/Flashing Setup Ribless

The CPS programming setup, shown in Figures 4-2 is used to program and flash the radio using the
Radio front Telco connector.
FKN8096
Data =Programming
Boot = Flashing
Figure 4-2 CPS Programming/Flashing Setup Cable with Internal RIB
4.0 CPS Programming Setup with RIB
The CPS programming setup, shown in Figures 4-3 is used to program the radio using the Radio
front Telco connector.
ACC
8-pin Telco
FKN8096
10-pin Telco
Ribless Programming Cable RKN4081
Programming
Cable
GTF374
DB25
Figure 4-3 CPS Programming Setup with RIB
DC
+13,2VDC
Power
RF
Supply
ACC
DC
+13,2VDC
Power
RF
Supply
DB15
RIB
RLN-4008
Cable 3080369B72 (9 PIN)
Cable 3080369B71 (25 PIN)
RADIO TUNING AND PROGRAMMING
Tx Data
Rx Data
Gnd
DB25
Tx Data
Rx
Data
Gnd