Table of Contents
Advertisement
Connections
(Continued)
12
AUDIO
L
R
AV1 IN
AV2 IN
Transmitter
DC
power
cable
Sound
signal
SIGNAL
ID./CH.
DC IN
Wireless
Speaker
(Right)
Center
speaker
Front
speaker
(Left)
Front
speaker
(Right)
Subwoofer
Wireless
Speaker
(Left)
cable
Speaker System
Connection
Speaker
Connections
Connect the
speakers
to
the front
(right, left)
or
center
speaker
connectors.
Connect the subwoofer
to
the woofer
connector.
Connect the power cord of the wireless
speaker
to
the outlet.
Connect the DC IN
connector
of transmitter and the transmitter
connector
of
rear
panel
with the DC power cable.
Connect the SOUND SIGNAL
connector
of transmitter and the
rear
(right, left) speaker
connector
of
rear
panel
with the SOUND SIGNAL cable.
Set the distance between the transmitter and wireless
speaker (right, left)
within 10m.
Notes:
Optimum performance
can
be
implemented only
when the transmitter and the wireless
speaker
within distance of 2m
through
10m is used since communication failure may
occur
if
closely approaching
distance between them.
Be
sure
to
match the
speaker
cable
to
the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed,
the sound will be distorted and will lack base.
Do
not
remove
the front
cover
of
supplied speaker.
It takes
a
few seconds
(and
may take
longer)
for the transmitter and wireless
speaker (left, right)
to
communicate with each
other.
When the main
set
is turned
off,
the transmitter is also turned off
automatically
and the wireless
speaker
is in
standby
mode
(red
LED
indicator).
If the wireless
speaker
is turned
off,
the wireless
speaker
will
not
function.
Hide quick links:
Advertisement
Table of Contents
