Preset Modes - Acer AL1502 User Manual

E-6 User's Guide

PRESET MODES

To reduce the need for adjustment for different modes, the monitor has default setting
modes that are most commonly used as given in the table below. For optimum adjustment,
the user is suggested to perform the Auto Setup under Windows "Full Screen" pattern. If
the mode in use does not match one of the defaults, the user can store their preferred
modes in the user modes. The monitor is capable of storing up to 9 user modes. The only
condition to store as a user mode is the new display information must have 1 KHz difference
for horizontal frequency or 1 Hz for vertical frequency or the sync signal polarities are
different from the default modes.
Mode
1 VGA
2 VGA
3 VGA
4 VGA
5 MAC
6 VESA
7 VESA
8 VESA
9 VESA
10 VESA
11 VESA
12 MAC
13 VESA
14 SUN
15 VESA
16 VESA
Resolution
720 x 350 70 Hz
720 x 400 70 Hz
640 x 480 56 Hz
640 x 480 60 Hz
640 x 480 66 Hz
640 x 480 72 Hz
640 x 480 75 Hz
800 x 600 56 Hz
800 x 600 60 Hz
800 x 600 75 Hz
800 x 600 72 Hz
832 x 624 75 Hz
1024 x 768 60 Hz
1024 x 768 65 Hz
1024 x 768 70 Hz
1024 x 768 75 Hz
H. Freq. Band Width
(KHz) (MHz)
31.47 28.322
31.47 28.322
24.83 21.053
31.47 25.175
35.00 32.24
37.86 31.5
37.50 31.5
35.16 36
37.88 40
46.88 49.5
48.08 50
49.72 57.283
48.36 65
52.45 70.49
56.48 75
60.02 78.75
Polarity
H V
+ -
- +
- -
- -
-
-
- -
- -
+ +
+ +
+ +
+ +
- -
- -
- -
- -
+ +