Camera/Printer Connection - Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Connection Manual

Camera/Printer Connection

Connect the camera to the printer using the following procedures. (Please refer to your
printer user guide for details about the printer connection.)
Once the camera and printer are ready for printing, the
on the camera's LCD monitor.
Printing procedures differ according to the icon that appears on the LCD monitor
(p. 2).
Before You Connect the Camera
Prepare the printer. (Refer to the printer's user guide.)
Confirm which connection cable should be used (see page 2).
1
Connect the camera to the printer.
This illustration shows the PowerShot S400 DIGITAL ELPH/
DIGITAL IXUS 400 as an example.
2
Turn the printer's power on.
3
Set the camera to Playback mode and turn the power on.
Some camera models power up when the printer's power is turned on.
4
, or
monitor. You can now print.
The following operations are not available during a camera/printer connection.
• Movie playback.
• Language settings that use the SET button and the MENU button.
Disconnecting the Camera and the Printer
1. Detach the cable from the printer.
2. Turn the camera's power off.
3. Detach the cable from the camera.
• When you detach the cable, hold the plug and do not pull by the cable.
To Printer
Camera: Connect the cable to the DIGITAL terminal.
Printer: Refer to the printer's user guide.
DIGITAL terminal
appears on the upper left corner of the LCD
, or icon appears
5