D-Link DAP-1160 Quick Installation Manual page 5

Step 3: Begin Configuring your DAP-1160.
This configuration step presumes that you will use the DAP-1160's default
factory setting of operation mode of AP (access point). This mode allows
computers and devices equipped 802.11g standard wireless LAN interfaces
to communicate with other wireless computers and devices through the
DAP-1160. In addition, the default factory setting provides no wireless security.
To set the DAP-1160 to another operation mode and to set its wireless security,
refer to its User's Manual.
Run a web browser on your computer.
The following login screen will appear:
In the Address field, type
in the default IP address
http://192.168.0.50
Type Return.
In the User Name field,
type in the default name
admin
Leave the Password
field blank.
Once you have logged in, the following Setup screen will appear:
Click Launch Setup Wizard