Download Print this page
A.O. Smith TJ-80A Dimensions
A.O. Smith TJ-80A Dimensions

A.O. Smith TJ-80A Dimensions

Commercial storage tanks

Advertisement

Quick Links

FACTORY JACKETED AND
INSULATED STORAGE TANKS
These A. O. Smith storage tanks are designed for storing potable water. Fitting locations
are designed to meet the needs of normal installations plus those for the
A. O. Smith Cer-Temp 80
and Shure -Temp
®
FEATURES
A. O. Smith storage tanks are ideal for
use with gas-fired copper heat exchanger
equipment for storage of any potable water
at temperatures up to 180°F.
GLASS-LINED TANK - Alkaline borosilicate
composition permanently fused to steel
by firing at a temperature of 1600°F,
providing years of corrosion protection and
dependable use.
HEAVY GAUGE STEEL JACKET - With
baked enamel finish.
THREADED OPENINGS - All tanks
furnished with threaded openings for
thermometer, relief valve, 2" recirculation
lines, tankstat, and drain valve.
INSULATION - Storage Tanks meet or
exceed R12.5 minimum thermal insulation
requirements of the U. S. Department
of Energy and current edition of
ASHRAE/IESNA 90.1
TJ-80S, TJ-80A, TJV-120M and TJV-120A
• Fits through 30" door
• Magnesium anode for anti-corrosion
protection
TJ-80A
• 80 gallons
• High density foam insulation saves energy,
helps reduce standby heat loss
• 160 psi ASME standard working pressure
TJV-120A
• 119 gallons
• High density foam insulation saves energy,
helps reduce standby heat loss
• 160 psi ASME standard working pressure
Revised September 2010
Commercial Storage Tanks
®
piping methods.
TJ-80S
• 80 gallons
• High density foam insulation saves energy,
helps reduce standby heat loss
• 160 psi working pressure
TJV-120M
• 119 gallons
• High density foam insulation saves energy,
helps reduce standby heat loss
• 160 psi working pressure
OPTIONS
Perfectly balanced manifold kits (120 gallon
models) allow installation where 240 to 480
gallons of stored water is required.
TJV-200-M - 175 GALLONS
• 160 psi ASME standard working pressure
• 2" foam insulation
• Handhole cleanout (Standard)
• Fits through 33" door
• Storage is downsized to 175 gallons for
a 32" x 77" envelope for space restrictive
installations. Model TJV-200 is available
with 200 gallons of storage.
• Magnesium anodes for extra
corrosion protection
5 YEAR WARRANTY
If the tank should leak any time during
the first 5 years, under the terms of the
warranty, A. O. Smith will repair or replace
the tank. Installation, labor, handling
and local delivery are extra. For complete
information, consult the written warranty
or contact A. O. Smith.
MODELS
TJ-80S, TJ-80A
TJV-120A, TJV-120M
& TJV-200M
120 Gallon Model
(FOR SELECT MODELS)
Page 1 of 4
AOSTT35100

Advertisement

loading

Summary of Contents for A.O. Smith TJ-80A

  • Page 1 HEAVY GAUGE STEEL JACKET - With baked enamel finish. THREADED OPENINGS - All tanks furnished with threaded openings for thermometer, relief valve, 2” recirculation lines, tankstat, and drain valve. INSULATION - Storage Tanks meet or exceed R12.5 minimum thermal insulation requirements of the U. S. Department of Energy and current edition of ASHRAE/IESNA 90.1 TJ-80S, TJ-80A, TJV-120M and TJV-120A • Fits through 30” door • Magnesium anode for anti-corrosion protection TJ-80A • 80 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi ASME standard working pressure TJV-120A • 119 gallons • High density foam insulation saves energy, helps reduce standby heat loss • 160 psi ASME standard working pressure...
  • Page 2 15" 11" 4 1/8" 3 1/2" 3/4" NPT FRONT For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice. Revised September 2010 www.hotwater.com Commercial Storage Tanks ® 2" NPT 3/4" NPT (ANODE) 29 3/8"...
  • Page 3 32 1/4" 19 1/2" 11" 9 3/4" 3/4" NPT REAR For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice. Revised September 2010 www.hotwater.com Commercial Storage Tanks ® 1" NPT 2"...
  • Page 4 ASHRAE/IESNA 90.1. Cathodic protection shall be provided. Tank shall have a working pressure of ____ psi. Tank shall have a five year limited warranty as outlined in the written warranty. For Technical Information and Automated Fax Service, call 800-527-1953. A.O. Smith Corporation reserves the right to make product changes or improvements without prior notice. Revised September 2010 www.hotwater.com...

This manual is also suitable for:

DveTj-80sTjv-120aTjv-120mTjv-200m