Press and hold this button (plus a volume button on some models) to turn the device on or off. Note: Press this button one time while the wego A is on to put it into “Sleep” mode. This feature will conserve battery life when the wego A is not in use.
Page 5
TTMT Switch Interface hardware and features Power Flip switch into up position to turn on the Bluetooth device and flip switch down to turn it off. Power light indicator When this light is on and red, the Bluetooth device is on. Charging the TTMT Switch Interface Plug charger into port to charge the switch interface.
Setup Instructions Turn on the TTMT Switch Interface, using the on/off switch located on the side of the interface box. You will see a red power light to indicate the interface is turned on. Ensure the Switch Interface is connected to the wego via Bluetooth. 1.
1. Start Guided Access by quickly triple-clicking the home button. Note: if your wego A model does not have a home button, use the Power button as shown on page 2. Enter all 1’s when prompted for password. It will open this screen.
Setup with Proloquo2Go Return to the communication app, Proloquo2Go. Open Options > Access Method > and toggle on Scanning. Select Configuration. Now you can select your Scanning Mode and Pattern. Single-switch scanning (1 switch, connected to Port 1): Mode - Automatic Scanning: (default) Highlighted selection advances through items automatically.
Setup with TouchChat, Grid, LAMP, Avaz & Speak for Yourself 1. In the iOS Settings, select Accessibility > Switch Control. Do not toggle on Switch Control until setup is complete. 2. On the screen, select Switches > Add New Switch > External. 3.
Setup with GoTalk Now 1. Return to the communication app, GoTalk Now. Open Settings and Scroll to Scanning. 2. Select Scanning Device Type > Space and Enter Switch. 3. Determine Scanning Mode. a. For single-switch scanning, toggle on Auto Scan. b.
Setup with Cough Drop 1. Return to the communication app, Cough Drop. Tap on the User icon in the top right corner > Exit Speak Mode > User Icon > Preferences. Scroll to and tap on Scanning Settings. Check “Enable switch-activated scanning.” 2.
FCC Compliance Information Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 13
LAMP Words for Life ™ is a trademark of PRC-Saltillo. All rights reserved. The LAMP Treatment Approach is a trademark of the Center for AAC & Autism. All rights reserved. For more information about LAMP and its features, please see https://aacapps.com/support TouchChat ®...
Need Help? 877.392.2299 Option 3 support@talktometechnologies.com talktometechnologies.com (click Support) Join in the conversation… Connect with us for resources, contests and more!