Cleaning The Debris Fi Lter - Samsung WF231ANW/XAA User Manual

cleaning and maintaining your
washer
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris fi lter when water does not drain well or the "nd" error message is displayed.
1. Open the fi lter cover by pressing and pulling the handle
of the fi lter cover with your fi nger.
2. Holding the drain cap, pull the drain tube that
is hooked on the guide hook to the front.Do
not pull the drain tube with excessive force.
3. Place a bowl under the washing machine
to catch any remaining water. Then, hold
the drain tube with one hand, and turn the
emergency drain cap counter clockwise with
the other hand to separate it from the drain
tube.
4. Drain the remaining water completely.
5. Pull out the debris cap and debris fi lter assembly.
6. Wash any dirt or other material from the
debris fi lter. Make sure the drain pump
propeller behind the debris fi lter is not
blocked.
7. When you have fi nished cleaning the fi lter, insert the debris
cap and fi lter assembly back into the washer. Turn the
debris fi lter cap clockwise until the indicator on the debris
fi lter cap is in the 12 o'clock position, pointing to the
indicator on the washer.
8. Re-attach the emergency drain cap to the drain tube, and
then hook the tube to the hook guide.
9. Re-install the fi lter cover.
26_ cleaning and maintaining your washer
WF231ANW-02832D_EN.indd Sec7:26 WF231ANW-02832D_EN.indd Sec7:26
Filter cover
Step 1 Step 2
Drain cap
Debris fi lter cap
Debris fi lter
Debris fi lter
cap
2011-04-18 2011-04-18 10:38:26 10:38:26