Get Started; Charge The Battery; How To Wear - Philips 1000 Series User Manual

3 Get started

Charge the battery

Note
 Before you use your headphones, place them
in the charging box and charge the battery for
2 hours for optimum battery capacity and
lifetime.
 Use only the original USB-C charging cable to
avoid any damage.
 Finish your call before charging. Connecting
the earpieces to charge will power them o .
Earpiece
Take out the earpieces and remove the
insulation labels.
Put the earpieces back into the
charging box and close the lid.
• The earpieces start charging and the
blue LED light goes on
• When the earpieces are fully
charged, the blue light will go o
Tip
 Normally, a full charge takes 2 hours (for the
earpieces or charging box) by USB cable.
Charging Box
Plug one end of the USB-C cable into
the charging box and the other end into
the power source.
Tip
 The charging box serves as a portable backup
battery for charging the earpieces. When the
charging box is fully charged, it will fully
recharge the earpieces 3 times.

How to wear

Select suitable ear tips for optimum t
A tight, secure t will provide the best
sound quality and noise-cancellation.
1
Test which ear tip provides you with
the best sound and wearing
comfort.
2
3 sizes of replaceable ear tip covers
are provided: large, medium and
small.
L M S
EN 5