Table of Contents
Advertisement
ADJUSTMENT, REPLACEMENT AND ASSEMBLY OF
MECHANICAL UNITS
work in the field, not referring to the more
complicated repairs which would require the use of
special equipment and tools (drum assembly
replacement, for example).
The following tools are required for proper service and satisfactory repair.
Jig Item
1
Reel Disk Height Adjusting Jig
Master Plane Jig
2
3
A/C Head Tilt Adjusting Jig
4
Gauge Head
5
6
Cassette Torque Meter
Tension Gauge (3009)
7
Tension Gauge (2.0kg)
Hex Wrench (0.9mm)
a
Hex Wrench (1.2mm)
Hex Wrench (1.5mm)
Alignment Tape (PAL)
9
Alignment Tape (PAL)
Tension Gauge Adapter
We are sure that the easy-to-handle tools listed
below would be more than handy for periodical
maintenance to keep the machine in its original
working condition.
Configuration
Part No. Code
I
I
I
I
Remarks
These Jigs are used for checking and
adjusting the reel disk height.
This Jig is used for setting the A/C
head tilt.
These Jigs are used for checking and
adjusting the torque of take-up and
supply reel disks.
This cassette torque meter is used
for checking and adjusting the
torque of take-up for measuring
tape back tension-
are two gauges used
There
tension measurements, 300 g and
These Jigs are used for loosening or
tightening special hexagon type
screws.
These tapes are especially used for
electrical fine adjustment.
This Jig is used with the tension
g a u g e .
R o t a r y t r a n s f o r m e r
clearance adjusting jig.
for the
Advertisement
Table of Contents
