Samsung Chrono SCH-R261 User Manual page 91

– Lookup: Lets you look up and display contact information for any name
stored in your Contacts list by saying the name. (For more information,
refer to "Finding a Contacts Entry" on page 35.)
– Go to: Lets you access all of the Main Menus on your phone.
– Check: Lets you check your phone's status (that is, network coverage,
signal strength, and battery in the same report), network coverage,
signal strength, battery, and phone number.
Note: Speaking clearly, say the command that you want to use.
If, after a few seconds, the device has not recognized a command, it
prompts you to repeat the command.
If, after a few more seconds, it still has not recognized a command, it
tells you "Sorry, no match found," and cancels voice recognition.
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
•
Voice-Activating Your Contacts List
When you first start Voice SVC, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, Voice SVC automatically reloads and voice-
activates the entire list.
Ending Calls Before Restarting Voice SVC
When you use Voice SVC to make a call, you must end that call
before you can use Voice SVC again.
Tools/Utilities 88