Editing A Contacts Entry - Samsung Chrono SCH-R261 User Manual

Portable tri-band mobile phone
Hide thumbs Also See for Chrono SCH-R261:
Table of Contents

Advertisement

Editing a Contacts Entry

Editing Contacts Name and Numbers
Find the Contacts entry you wish to change. (For more
1.
information, refer to "Finding a Contacts Entry" on
page 35.)
Use the Navigation key to highlight the entry and press
2.
View. The View Contact screen appears in the display
showing the highlighted entry's information.
Use the Navigation key to review the information for the
3.
entry that you wish to change, then press
Edit Contact screen appears in the display.
Use the Navigation key to highlight the particular
4.
information you want to add or change.
• Press
to backspace and delete numbers or letters.
• Press and hold
field.
• Press Options.
The following options pop-up in the display:
– Set Speed Dial / Remove speed dial: Assign/remove a speed dial
number. (For more information, refer to "Speed Dial" on page 43.)
– Set as default: Set the number the phone will dial when Contacts
dialing or speed dialing.
– Wait: A hard pause (waits for input from you).
39
to clear all numbers or letters in the highlighted
When you're finished changing the Contacts entry:
5.
• To save your changes, press
• To discard your changes, press
Add Pauses to Contacts Numbers
Edit. The
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
Wait: Stops the calling sequence until the phone receives further input.
2-Sec Pause: Stops the calling sequence for two seconds, then sends
the remaining digits.
Note: You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time
of four seconds. Keep in mind that pauses count as digits towards the
32-digit maximum.
– 2-Sec Pause: A 2-second pause after which dialing resumes. (For
more information, refer to "Add Pauses to Contacts Numbers"
on page 39.)
Select the desired option.
saving your changes before exiting. Press No to discard your
changes.
.
. You are prompted to confirm

Advertisement

Table of Contents
loading

Table of Contents