Samsung SCH-R760 User Manual page 124

Wi-Fi settings
Set up and manage wireless access points.
From the Settings menu, touch Wireless and networks
1.
Wi-Fi settings. The following settings are available:
• Wi-Fi: Touch to enable your phone's Wi-Fi service.
• Network notification: When enabled, notifies you when an open
Wi-Fi network is available.
• WPS button connection: Configure new wireless networks
automatically.
2. Swipe up to Wi-Fi networks. The following options are
available:
• Touch a Wi-Fi network to connect to, disconnect from, or Forget the
network.
• Add Wi-Fi network: Manually add a new Wi-Fi connection.
Touch Menu. The following options are available:
3.
• Scan: Touch to search for available Wi-Fi access points. Search
results are listed in Wi-Fi networks.
• Advanced: See "Advanced Wi-Fi settings" on page 120.
120
Advanced Wi-Fi settings
From the Settings menu, touch Wireless and networks
Wi-Fi settings Advanced.
• Wi-Fi sleep policy: Specify when to switch from Wi-Fi to mobile
data for data communications. Touch to choose from When screen
turns off, Never when plugged in, or Never.
• MAC address: View your phone's MAC address, needed for
connecting to some secured networks (not configurable).
• Proxy: Touch to enter a proxy number.
• Port: Touch to enter a port number.
• IP address: Shows the Internet Protocol address assigned to this
device.
• IP (Internet Protocol) settings:
– Use static IP: Touch to use a static IP address. When enabled, a check
mark appears in the check box.
– IP address: When using a static IP, enter the static IP address.
– Gateway: When using a static IP, enter the Gateway.
– Netmask: When using a static IP, enter the Netmask.
– DNS 1: When using a static IP, enter the DNS 1 value.
– DNS 2: When using a static IP, enter the DNS 2 value.