Table of Contents
Advertisement
Using Outlook for E-mail
Install ActiveSync on your PC and set up a Standard Partnership, so you can
send/receive E-mail. For more information, refer to "Setting Up a Partnership" on
page 140. E-mail is composed off-line and is sent to the intended recipient(s) the
next time you perform ActiveSync.
From the Today Screen, tap Start
1.
the screen.
Tap Messaging
2.
Highlight Outlook E-mail and press
3.
Press the Menu
4.
New is highlighted, press
5.
Enter the E-mail address in the To field.
6.
Press down on the Optical Mouse to move to the Subject field and enter a
7.
subject.
Use the Optical Mouse to move to the Message field and enter the content
8.
of your E-mail.
When you're finished, press the Send
9.
Using an ISP for E-mail
If you've configured your Saga™ to send E-mail using an Internet Service Provider
(ISP), you can send E-mail directly from your Saga™ without connecting to your PC
through ActiveSync.
Tip: Before you can send and receive E-mail using your ISP, see "Setup of an ISP" on page 77.
Setup of an ISP
Before you can send E-mail directly, you'll need to configure your Saga™ to work
through an existing account with an Internet Service Provider (ISP) or your network
at work. To configure your Saga™ to work with an ISP:
From the Today Screen, tap Start
1.
the screen.
Tap Settings
2.
Tap the Connections tab.
3.
Tap Connections
4.
77
to reveal the Messaging screen.
right soft key.
.
. By default, the Personal tab is highlighted.
and select Add a new modem connection.
located in the upper left corner of
.
left soft key.
located in the upper left corner of
Advertisement
Table of Contents
