Table of Contents
Advertisement
Scanning and Connecting to a Wi-Fi Network
®
When you turn on Wi-Fi
, your phone searches for available Wi-
Fi connections, then displays them on screen.
From the Home screen, press the
1.
touch Settings
Wireless & networks Wi-Fi settings.
Touch Wi-Fi to turn Wi-Fi On.
2.
When your phone completes a scan, touch a Wi-Fi network
3.
to connect. If the Wi-Fi network is open, you will be
automatically connected. If the Wi-Fi network is secured,
enter the password at the prompt to connect.
Adding a Wi-Fi Network Manually
From the Home screen, press the
1.
touch Settings
Wireless & networks Wi-Fi settings.
Touch Wi-Fi to turn Wi-Fi
2.
On the pop-up Wi-Fi settings menu, touch Add Wi-Fi
3.
network, then enter these fields:
• Network Name (SSID): Enter the name of the Wi-Fi Wireless
Access Point.
• Security: Select the type of security used by the WAP.
• Key (Passphrase): If the WAP is secured, enter the password
or key.
Menu Key, then
Menu Key, then
®
On.
Adding a Wi-Fi Network using WPS
Some wireless access points provide connections via the Wi-Fi
Protected Setup (WPS) standard, which provides easy and secure
setup and connection. To use the your phone's WPS setting, the
wireless access point must support WPS.
From the Home screen, press the
1.
touch Settings
Wireless & networks Wi-Fi settings.
Check to see that your phone's Wi-Fi service is on. If it is
2.
not on, touch Wi-Fi to turn Wi-Fi On.
Touch WPS button connection.
3.
Within 2 minutes, press the WPS button on the wireless
4.
access point.
Follow the prompts to complete the setup.
5.
®
Menu Key, then
Connections
80
Advertisement
Table of Contents
