Connecting The Printer To A Power Source - Canon CP-100 User Manual

Connecting the Printer to a Power Source

1
2
Compact Power Adapter
3
• Please also refer to "Proper Usage and Handling" for advice about proper
handling of printer.
Place the printer on a flat area.
• Be sure to leave about 10 cm (4 in.) of
clearance around the paper-handling
slot (at the rear) so that paper has
sufficient room to jut out from the slot
10 cm
(4 in.) during printing.
• Always check that nothing clogs up
the paper-retrieving hole under the
printer.
Connect the AC cable to the
Compact Power Adapter CA-
To Power Outlet
CP100 and insert the plug in a
power outlet.
AC Cable
Connect the Compact Power
Adapter cable to the printer.
Compact Power Adapter Cable
p. 11
21