Alarm Clock - Samsung SPH-M920 User Manual

Alarm Clock

Your device comes with a built-in alarm clock that has
multiple alarm capabilities. There is no limit to the
number of alarm events you can create.
1.
Press and tap
Note:
Upon your first launch of the Alarm Clock application,
three alarm presets are set up by default and ready for
you to customize. These alarms are turned off by
default.
2.
To activate an alarm, tap the checkmark to the
right of the alarm.
Note:
A new alarm can also be created from the Alarm page
by pressing
> Add alarm
3.
To edit an alarm, tap the entry and then tap the
field to adjust the alarm time.
Time
Adjust the hour and minute by tapping either
or .
Tap the or button to change the value.
AM PM
Tap when finished.
Set
> (Alarm Clock) .
.
Note:
The number of hours and minutes left before the alarm
goes off is briefly displayed onscreen after you set the
new alarm time.
4.
Tap to select an audio ringtone that will
Ringtone
sound with the alarm.
Tap a ringtone to hear an audio sample.
Tap to accept the ringtone assignment.
OK
5.
Tap to add a vibration feature to the alarm.
Vibrate
6. Tap the field to select a repeating status for
Repeat
the alarm.
Place a green checkmark adjacent to the desired
repetition days and tap
7.
Select a unique name for this alarm event by
tapping the field, entering a new label, and
Label
tapping .
OK
8. Tap to store the new alarm event.
Done
Note: To allow the alarm to sound even while the device is in
silent mode, press
the
Alarm in silent mode
OK .
and tap Settings , then activate
field.
2F. Calendar & Tools 101