Samsung Galaxy S Epic SPH-D700 User Manual page 169

Tap . (Your device will display a list of
3.
Scan devices
discovered in-range Bluetooth devices.
Tap a device from the list to initiate pairing.
4.
Enter the passkey or PIN code and tap
5.
The external device will then have to also accept
6.
the connection and enter your device's PIN code.
Once successfully paired to an external device,
appears within the Status area.
Due to different specifications and features of other
Note:
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
Pairing between two Bluetooth devices is a one-time
Note:
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
To disconnect a paired device:
Disconnecting a paired device breaks the connection
between the device and your Epic 4G, but retains the
knowledge of the pairing. At a later point when you
.
OK
wish to reconnect the device, there is no need to setup
the connection information again.
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, touch and hold
2.
the name of the previously paired device.
Tap
3.
Unpair
Disconnections are manually done but often occur
Note:
automatically if the paired device goes out of range of
your Epic 4G or it is powered off.
to confirm disconnection.
2J. Bluetooth 155