Problem Areas
Check:
Inspect the Cap SIM Assembly.
Action:
1. If dirty – clean it.
2. If not properly assembled – disassemble and reassemble
it.
3. If the Cap SIM Assembly is damaged – replace it.
Run the Water Resistance Test again!
Check:
Inspect the Cap USB Assembly.
Action:
1. If dirty – clean it.
2. If not properly assembled – disassemble and reassemble
it.
3. If the Cap USB Assembly is damaged – replace it.
Run the Water Resistance Test again!
1274-7272
Rev 1
Sony Mobile Communications AB – Company Internal
Troubleshooting Guide (mech)
39(65)