Sharp LC-32M400M-BK Service Manual page 18

LC-32M400M-BK/WH/RD
4.1.2 Component 15K 50Hz signal adjustment (COMP-SD)
Adjustment item Adjustment conditions
1 Adjustment [Signal]
COMP 15K 50Hz (576i)
100% Full-field Colour Bar
[Terminal]
INPUT 6 COMPONENT
2 Auto adjustment Process Mode page 4
performance (COMP SD)
4.1.3 Component 33K 60Hz signal adjustment (COMP-HD)
Adjustment item Adjustment conditions
1 Adjustment [Signal]
COMP 33K 60Hz (1080i)
100% Full-field Colour Bar
[Terminal]
INPUT 6 COMPONENT
2 Auto adjustment Process Mode page 5
performance (COMP HD)
4.1.4 PC (ANALOG RGB) signal adjustment (PC-RGB)
Adjustment item Adjustment conditions
1 Adjustment [Signal]
XGA 60Hz
100% Checkered Pattern
[Terminal]
PC INPUT
2 Auto adjustment Process Mode page 6
performance (PC-RGB)
Feed the COMPONENT 15K 50Hz (576i) 100% Full-field Colour Bar signal (100% colour
saturation) to INPUT 6 COMPONENT terminal.
1) At the related page, move cursor to [COMP SD ADJ], press ENTER.
2) [OK] appears when finished.
Feed the COMPONENT 33K 60Hz (1080i) 100% Full-field Colour Bar signal (100%
colour saturation) to INPUT 6 COMPONENT terminal.
1) At the related page, move cursor to [COMP HD ADJ], press ENTER.
2) [OK] appears when finished.
Feed the XGA 60Hz 100% Checkered pattern signal (100% colour saturation) to PC
INPUT.
*Please make sure SYNC is OFF.
1) At the related page, move cursor to [RGB ADJ], press ENTER.
2) [OK] appears when finished.
5 – 3
Adjustment procedure
100% white Black
Adjustment procedure
100% white Black
Adjustment procedure