Removing Of Major Parts - Sharp LC-15A2M Service Manual

LC-15A2M
1. Insert your finger into the center of the terminal cover
and pull it toward you to detach the terminal cover.
2. Remove the four screws 1 and one screw 2.
3. Open the cabinet B by approx. 45˚ from the bottom
of the cabinet (stand side).
4. Remove the lead wire from the cable clamp 3.
5. Remove the power connector 4.
6. Remove the connector 5 from the light reception
unit.
7. Remove the lead wire from the cable clamp 6.
8. Remove the speaker connector 7.
9. Remove the FFC from the FFC connector 8 on the
Main Unit.
10. Remove the connector 9 from the Operation Unit.
11. Remove the right and left speaker connectors 0
on the Terminal Unit.
Terminal Cover

REMOVING OF MAJOR PARTS

<<Disassembly of the Main Unit>>
1. Disconnect the flexible cable connectors q and
w from the LCD panel.
2. Disconnect the cable connectors e and r from
the fluorescent lamp.
3. Remove the four screws t.
<<Disassembly of the Terminal Unit>>
1. Remove the cover u.
2. Remove the five screws y.
3. Remove the two screws i. Take them out of the
cabinet holes.
<<Cabinet A side>>
Cabinet A
<<Cabinet B side>>
Cabinet B
6