Table of Contents
Advertisement
Troubleshooting >
Audio/Video
Audio/Video
What should I do if I cannot use my digital video camcorder?
❑ If a message appears stating that the i.LINK device is disconnected or turned off, the i.LINK cable may not be securely
plugged into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See Connecting an
i.LINK Device
(page 107)
❑ If you have disabled the i.LINK port in the BIOS setup screen, you cannot use the device connected to the i.LINK port. To
enable the port, follow the steps and the tip in Disabling Built-in Devices
How do I turn off the Windows startup sound?
To turn off the Windows startup sound, follow these steps:
1
Click Start and Control Panel.
2
Click Hardware and Sound.
3
Click Manage audio devices under Sound.
4
On the Sounds tab, click to cancel the Play Windows Startup sound check box.
5
Click OK.
for more information.
(page
130).
n
199
N
Advertisement
Table of Contents
