Sony VAIO PCG-Z600TEK User Manual page 59

Connecting peripheral devices
External Display


See the manual supplied with
your projector for more
information on installation and
use.
You may not be able to display
the computer's LCD and the
external display together,
depending on the types of
computer display and projector
used.
To connect a projector
You can use a projector as an external display, such as the Sony LCD Projector.
1
Use the I/O symbol to locate the Monitor connector. Plug the RGB signal cable into
this connector ( if needed, use an optional display adapter).
2
Use the i symbol to locate the Headphone connector. Plug the audio cable into
this connector.
Projector
Power cord
RGB signal cable
To remove the display adapter
Press both sides of the display adapter connector and unplug it from the computer.
To select a display
When you connect an external display to the monitor connector, you can press Fn+F7
to toggle the output between the Liquid Crystal Display (LCD), the external monitor,
or both devices.
See your Software guide in "Selecting the Display Mode" for more information.
Display adapter
(optional)
Audio cable
(not supplied)
59
n N