Table of Contents
Advertisement
Getting help
My USB floppy disk drive cannot write to a floppy disk
The floppy disk is write-protected. Disable the write-protect feature or use a floppy disk that is not
write-protected.
Check that the disk is properly inserted into the floppy disk drive.
Your disk may be corrupt. Try to insert another floppy disk.
When I double-click an application icon a message such as 'You must insert the application CD into your
CD-ROM drive' appears and the software does not start
Some titles require specific files that are located on the application CD-ROM. Insert the disc and try
starting the program again.
Make sure you place the disc in the tray with the label side facing up.
The disc tray does not eject even when the eject button is pressed
Check that the notebook is turned on.
The CD-writing application software may be stopping the disk from being ejected.
The reading speed of CD-RWs is very slow
Generally, the reading speed of a CD-RW is slower than that of a CD-ROM or CD-R. The reading speed can
also vary depending on the type of format.
The disc tray ejects even when it has been locked into place
Ensure that the disc is placed with the label side facing up.
The disc may be scratched. Place another disc to see if that is the reason.
There may be condensation in the drive. Remove the disc and leave the drive open for approximately
one hour.
n N
93
Advertisement
Table of Contents
