Table of Contents
Advertisement
Notes on Use
Other precautions
On handling the display filter
❑
Remove the clips on the top of the display before removing the display filter as
illustrated below.
❑
Hold the display filter by its sides to avoid leaving fingerprints on the display
filter.
❑
Wipe off the fingerprints left on the display filter with the supplied filter cleaner.
You can also use commercially available cleaners.
❑
Do not use solvents such as alcohol or thinner, as they may cause damage to the
surface of the display filter. When using other chemical solvents, read the
instructions thoroughly.
❑
Insert the bottom of the display filter into the groove at the bottom of the display
as illustrated below. Insert the display filter so that the clips' protruding parts face
left, then turn 90° to lock it in place.
clips
110
n N
Advertisement
Table of Contents
