Table of Contents
Advertisement
Using the Product Recovery CD-ROMs
The recovery process takes
between 10 to 20 minutes to
complete.
You must run the Application
Recovery CD (vol. 2 of 2) from
®
Windows
. The application will
not run from DOS.
When performing an application
recovery, you do not lose data on
your hard disk.
!
Applying a system recovery means that you will lose all your data stored on your C: drive (and your D: drive if
you modify partition settings). Therefore, before applying a system recovery, copy your data to an external disk.
®
If Windows
does not allow you to do that , try to copy your data from the DOS-prompt (to a floppy, a zip
drive, an additional hard disk, etc..).
!
CAUTION: make sure that your computer is connected to AC (not the batteries) before you attempt a system
recovery.
!
CAUTION: when the recovery is performed, you must remove the recovery CD-ROM from the drive before
restarting the computer. If the CD-ROM is still in the drive, you will restart a recovery process.
Procedure for starting a system recovery
1
Take the Recovery CD-ROMs.
2
Turn on your computer (using AC power only) and insert the System Recovery
CD-ROM in the CD-ROM drive.
3
Shut down your computer (press the power switch and hold it for more than four
seconds).
4
Wait ten seconds and turn your computer back on.
5
On the first screen that appears, click "OK".
6
The System Recovery CD screen appears, asking you what to do with the
partitions on your hard disk. At this stage you have 3 options available.
50
n N
Advertisement
Table of Contents
