Table of Contents
Advertisement
Using BlueSpace
When activating Bluetooth™ functionality for the first time, it will initialize itself. During this initialization, it is possible that the Found New
Hardware Wizard appears.
The Bluetooth™ virtual COM may be detected when the Bluetooth™ function is turned on/off. This is the case when the Found New Hardware
Wizard window appears with the message This wizard allows you to install the software linked to the detected hardware/ Bluetooth
Virtual COM...
To make sure the Bluetooth™ function works properly after this window appears, proceed as follows:
- Click the Next button in the Found New Hardware Wizard window.
- Click the Finish button.
If the Found New Hardware Wizard window appears again, repeat steps 1 and 2.
1
Local Device Information Area:
Displays the information about the local device when
Bluetooth™ services are active.
Here you can also set the local device and perform Device
Discoveries or chat with other computers.
2
Service buttons:
These buttons represent the services provided, such as File
Push, IP Connection, COM and Modem.
3
Remote Device Information Area:
Displays the information about the Bluetooth™ device found
during the Device Discovery.
The green frame in the centre, the Service Search button,
allows you to start Service Discovery for the device you have
selected.
4
Bluetooth™ Function buttons:
You can sort
, classify
information for connected devices.
Here you can turn the sound on or off
n N
60
, search
for, or delete
the
.
Advertisement
Table of Contents
