Table of Contents
Advertisement
Using the product recovery CD-ROMs
Reinstalling a device driver
Some applications or peripherals require specific drivers which you will not find in the Windows
Cache folder. To help you find or restore typical drivers needed by your pre-installed applications, you can
use the final product recovery CD-ROM.
To reinstall a device driver, proceed as follows:
1
First check whether the driver you want to reinstall is on the final product recovery CD-ROM. Only device
drivers that are not delivered with Windows
2
Check all underlying sub-directories for the appropriate driver.
3
Next, launch the Add Hardware Wizard (click Start, point to Control Panel, and then double-click
Add Hardware to install the appropriate device).
If you do not immediately see the Add Hardware icon, click Switch to Classic View on the left side.
If you installed a more recent driver you will get a warning message, in this case just ignore the warning.
®
can be found in the Drivers folder.
n N
35
®
Driver
Advertisement
Table of Contents
