Page 2
TLP02309 (LS915,LS916) 16.5 φ56±4 (mm) C G1/2 H G1/2 70±13 TLP02310 (LS915,LS916) 16.5 φ56±4 (mm) C G1/2 H G1/2 70±13 TLP02309 16.5 (mm) φ56±4 C G1/2 H G1/2 70±13 TLP02310 16.5 φ56±4 (mm) C G1/2 H G1/2 70±13...
03N51E Installation Manual 2017.8 TLP02309 Appearance of the Wall-Mounted Single Handle Faucet (Embedded Type) TLP02310 Install the product according to this Installation Manual so that the product fulfills its function. When the installation is over, fully explain how to use the single handle faucet to the customer.
Page 6
Completion Drawing TLP02309 (LS915,LS916) 16.5 φ56±4 (mm) C G1/2 H G1/2 70±13 TLP02310 (LS915,LS916) 16.5 φ56±4 (mm) C G1/2 H G1/2 70±13 Completion Drawing TLP02309 16.5 (mm) φ56±4 C G1/2 H G1/2 70±13 TLP02310 16.5 φ56±4 (mm) C G1/2 H G1/2 70±13...
Installation Procedure Cutting of the curing covers Cut the curing covers on the spout side Curing covers and the handle side to within 1mm from Cutting blade the finished surface of the wall. (Pipe saw, etc.) The curing covers should not be recessed from the finished surface.
Adjustment after installation Checking Items Checking of water discharge When the installation is over, check the following items. After the completion installation, open the main vale of the piping and make sure that Plate water comes out from the spout. And, make sure that no water leaks from the Spout clearance between the wall and the plate.