Managing drivers
Checking the driver's installation
When the computer restarts, check that the device is working properly.
To check the driver's installation, proceed as follows:
1
From the Start menu, click Control Panel.
The Control Panel window appears.
2
Double-click the System icon.
The System dialog box appears.
If you do not see the System icon, click Switch to Classic View on the left side.
3
Click the Hardware tab, then click Device Manager.
4
Double-click the option corresponding to the device you installed, then double-click your device.
The Properties dialog box appears.
5
Make sure that the This device is working properly message is displayed under Device status.
6
Click OK.
Close all the opened windows, your device is ready for use.
The device is not working properly in the following cases:
❑
Your device is shown in Device Manager with a yellow question or exclamation mark.
Right-click your device and click Uninstall. Then repeat from step 2 in Installing a driver
❑
Double-clicking the category of your device in the device manager list does not display your device.
You have to remove your device. Please refer to Uninstalling a driver
repeat from step 2 in Installing a driver
❑
Double-clicking Other devices displays your device.
You have to right-click your device, then click Uninstall. Repeat from step 2 in Installing a driver
(page
❑
If the This device is working properly message is not displayed, the device is not working properly.
Click OK to close the Properties dialog box, then reinstall the driver as follows:
34).
(page
34).
n N
36
(page
(page 39)
to remove it. Then
34).