Table of Contents
Advertisement
Using your notebook
Using the CD-RW/DVD-ROM drive
Your computer is equipped with a CD-RW/DVD-ROM drive.
To insert a disc, proceed as follows:
1
Turn on the computer.
2
Press the eject button (1) to open the drive.
The tray slides out.
3
Place a disc in the middle of the tray with the label side facing up
until the disc clicks into place.
4
Close the tray by pushing it gently.
When the computer is in Standby or Hibernate mode, you cannot insert or remove a disc.
Be sure to seat the disc firmly over the disc drive hub fingers. If you do not seat the disc firmly, you
could damage your disc drive and you may not be able to open the tray.
When you finish using a disc, wait until the LED indicator turns off and then press the eject button
to remove the disc.
If the disc does not come out when you press the eject button, go to Windows Explorer or My
Computer. Select the drive, click the right button of your mouse and select Eject or press the
<Fn>+<E> keys to open the disk tray. If it still does not work, turn off the computer and insert a
thin, pointed object (e.g., a paper clip) into the manual eject hole.
n N
38
Advertisement
Table of Contents
