Table of Contents
Advertisement
Using Video software
Using DVgate Assemble
DVgate Assemble enables you to edit video files and still image files captured with DVgate Motion and
DVgate Still. Afterwards you can splice them together to form one single file. You can save the resulting
spliced video sequences as AVI, MPEG1, or MPEG2* format files.
To launch DVgate Assemble, proceed as follows:
1
Click Start.
2
Point to All Programs, DVgate and then to DVgate Assemble.
The DVgate Assemble main window appears.
* Depending on your model.
Creating an Assemble List
You can create an Assemble List with files you want to splice together. Afterwards you can always edit the
Assemble List by changing the order of the files and adding or deleting files.
To add files to an Assemble List, proceed as follows:
1
Launch DVgate Assemble.
2
Click the Add button.
The Add dialog box appears.
3
Choose AVI file in the Files of type drop-down box.
If you select Add all divided files saved with the same name,
DVgate Assemble will add all serial numbered files with the same
name to the list. Serial numbered files are files that are created when
DVgate Motion saves files that are split and applies consecutive
numbers to them. The numbers of the split files have 4 digits and
increase one unit at a time starting with 0001.
4
Select a file and click Open.
n N
24
Advertisement
Table of Contents
