Advertisement
2. QUICK DEMO
The Quick Demo is a way to get a customer interested in a product in less than
60 seconds.
Before You Start
1. The GA amp is extremely powerful. Be sure the MASTER VOLUME is set
to a reasonable level.
2. Select Manual Mode.
3. Set DRIVE to a clean setting so that the Progressive Amp LED is green.
Set VOLUME to a reasonable setting.
4. Set the TONE CONTROLS as shown above in STEP 2.
5. If you have the GA-FC footswitch, connect it to the footswitch input on the
back of the amp.
Roland GA-112/212 Training Guide
Advertisement
