Customising your computer
Selecting display modes
This notebook uses the NVIDIA GeForce4 420 Go video controller. You can select which display is used when
the computer is connected to an external display.
To select a display, proceed as follows:
1
Click the Start button, and then Control Panel.
The Control Panel appears.
2
Click Appearance and Themes.
3
Click Display.
The Display Properties dialog box appears.
4
Click the Settings tab.
5
Click the Advanced button.
The NVIDIA GeForce4 420 Go Properties dialog box appears.
6
Click the nView tab to set the display settings.
7
Select the Clone mode check box.
8
Click Apply and then OK.
The image appears on both the notebook and the TV display.
You may not be able to display the notebook LCD screen and an external display or a projector at the same time, depending on the types of computer
displays and projectors you are using.
Turn on the computer after you turned off the peripheral devices.
n N
76