Table of Contents
Advertisement
(f) Set the brightness control to the center and contrast control to the maximum.
(g) Receive a full white pattern.
(h) Select the R, G, B gain on the OSD menu and adjust the ADJUST +/– key to get the color coordinates in
X=0.281±0.02, Y=0.311±0.02.
(i) Adjust the sub contrast control to get the screen luminosity to 34 Ft/L.
6. Static Convergence Adjustment
(a) Apply a magenta cross hatch pattern on display.
(b) Adjust the focus from the best over all focus on the display.
Also adjust the brightness to the desired condition.
(c) Vertical red and blue lines are converged by varying the angles between the two tabs of the 4-pole
magnets.
(d) Horizontal red and blue lines are converged by varying the tabs together keeping the angle between
them constant.
(e) Apply a yellow cross hatch pattern on the display.
(f) Vertical green and red lines are converged by varying the angle between the two tabs of the 6-pole
magnets.
(g) Horizontal green and red lines are converged by varying the tabs together and keeping the angle
between them constant.
All manuals and user guides at all-guides.com
14
Advertisement
Table of Contents
