Table of Contents
Advertisement
FIRMWARE UPDATING
APP code download sequence (using USB flash disk)
1. Copy APP code upgrade.pkg to USB flash disk (root folder).
2. Plug USB flash disk into TV.
Figure 2 Plug USB Flash Disk into TV
3. Update firmware.
Press "OK" on the remote control to update the firmware.
4. Reboot (AC Off/On) TV to download APP software automatically.
5. Unplug USB flash disk and reboot TV again.
Figure 1 USB flash disk
Figure 3 Update firmware 1
Figure 4 Update firmware 2
Advertisement
Table of Contents
