Toshiba TW40F80 Quick Reference Manual page 4

6. Retract the four screws located at the
bottom of the bezel. Pull the bezel away from
the cabinet while lowering the top of the bezel
to the floor. The bezel will still be attached to
the cabinet via the Front-control board's wire
harness.
7. Retract the two screws located near
the Front control PC board. Remove the PC
board from the bezel. Pull the bezel away
from the cabinet.
8. Pull the two brass clips up and away
from the screen. Then, remove the lenticular
and fresnel screens by lifting them up and
away from the cabinet.
This completes the front disassemby
procedure.
4