Maintenance; Inspection; Cleaning And Disinfection; General Safety Information - Invacare Softform Premier Active 2 User Manual

6 Maintenance

6.1 Inspection

It is recommended to check mattresses (air cells and cover)
for strike-through (this may include fluid ingress, stains, rips
or damage) after the release of each patient or after each
period of use by a suitably qualified and competent person.
Check mattresses
1. Unzip the cover completely.
2. Check for any staining on the white underside of the
cover.
3. Check for any staining on the interior air cells.
4. Replace any stained items and dispose of as per local
authority procedure.

6.2 Cleaning and Disinfection

6.2.1 General Safety Information

CAUTION!
Risk of Contamination
– Take precautions for yourself and use
appropriate protective equipment.
1632862-A
CAUTION!
Risk of electric shock and product damage
– Switch off the device and disconnect from
mains, if applicable.
– When cleaning electronic components consider
their protection class regarding water ingress.
– Make sure that no water splashes to the plug
or the wall outlet.
– Do not touch the power socket with wet hands.
IMPORTANT!
Wrong fluids or methods can harm or damage
the product.
– All cleaning agents and disinfectants used must
be effective, compatible with one another and
must protect the materials they are used to
clean.
– Never use corrosive fluids (alkalines, acid etc.),
abrasive cleaning agents or solvents (cellulose
thinner, acetone etc.). We recommend a mild
detergent.
– Always make sure that the product is
completely dried before taking it into use again.
For cleaning and disinfection in clinical or long-term
care environments, follow your in-house procedures.
Maintenance
17