Symptom
Check item
Images are not
• Is the input of the TV set to
displayed on the
TV screen or LCD
screen.
Photo frame
Symptom
Check item
Nothing happens
even if you operate
the photo frame.
The photo frame
does not start.
A memory card
cannot be ejected.
external input?
—
—
—
Cause/Solutions
c Even if the input of the TV is not set to the
photo frame, images may sometimes not
be displayed on the TV screen or LCD
screen if an HDMI cable is connected.
c Change the input of the TV to the photo
frame, or disconnect the HDMI cable
from the photo frame and switch the
display to the LCD screen.
(DPF-XR100 only)
Cause/Solutions
c Push the reset switch on the back of the
photo frame using a long, thin object such
as a pin, etc. (page 9).
c Use maintenance mode to initialize the
system of the photo frame (page 29).
c If a miniSD card, microSD card, or
"Memory Stick Micro" is inserted
improperly, it may be possible to take it
out using a fine-tipped tool such as
tweezers or needle-nose pliers.
In this case, be careful that this does not
damage the memory card and/or photo
frame.
Continued
GB
59