DeLonghi EW7707CM Manual page 3

used individually, after unit has reached the operating
temperature:
- button in position «l» = minimum power (indicator
light on);
- button in position «ll» = intermediate power (indicator
light on);
- both buttons in position «l» «ll» = maximum power
(indicator lights on)
With pilot lights ON, the heater is ON.
LOCATION
Place the heater on the floor beneath the coldest window
in the room, or any other location. Your heater will reduce
the effect of cold drafts. The heater should not be placed
immediately below a power outlet. Do not use this radiator in
rooms with a floor area of less than 43 square feet (4 sq. m.).
CONNECTION
The radiator should be connected to a properly polarized
household outlet in perfect working condition. Keep loose
clothing or bedding, furniture and flammable material away
from the heater's wall outlet.
Your product is equipped with a polarized alternating
current line plug (a plug having one prong wider than the
others). This plug will fit into the power outlet only one
way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not attempt to modify the plug to
bypass this safety feature.
TURNING ON TWO-SWITCH MODELS
Turn the thermostat clockwise to its maximum position. Push
down both switches. The switch lights stay on independently
of the thermostat cycling.
When room reaches the desired temperature, turn the
thermostat knob counter-clockwise very slowly and carefully
until you hear a click. This should set your heater to maintain
the desired temperature by cycling on and off as required.
USE OF THERMOSTAT
The thermostat operates according to room air temperature,
rather than radiator temperature. Turning it counter-
clockwise to smaller numbers would decrease the
temperature; clockwise to greater numbers would increase
the temperature.
ANTIFREEZE function
Turn the thermostat dial to the
switches on. The appliance will maintain a minimum room
temperature of approximately 41°F (5°C), thus preventing
freezing while conserving energy.
COMFORTEMP Function
With both switches on and the COMFORTEMP button de-
pressed the appliance is automatically set to reach and main-
tain the suggested & preset ideal energy-saving temperature.
When operating in COMFORTEMP mode, the half-circle green
pilot light is on. To quit the COMFORTEMP function and return
to manual operation, depress the COMFORTEMP button once
again.
Important! To completely shut the heater off, ON/
OFF both switches must be set in the OFF position.
A safety device
A safety device switches the heater off in the event of
overheating. To restart the heater, call the nearest Service
center.
MAINTENANCE AND SERVICE
Always unplug the heater from the power outlet and allow
the radiator to cool. Wipe radiator with a soft damp cloth; do
not use detergents and abrasives. Should the radiator not be
in use over a certain length of time, roll the cable around the
holder and store it in a dry place.
This appliance has been built to last for many years of
trouble-free service. In case of malfunction or doubt, do not
try to repair the heater by yourself: this might increase the
risk of fire and electric shock. Contact the De longhi toll free
number.
6
position and push both