Table of Contents
Advertisement
BASIC SETUP AND OPERATION
For more information on connecting and using the monitor, refer to the owner's guide.
Connect the power cord to the rear panel.
Connect to external equipment.
Example 1: Connecting to PC
To insert D-sub 15 pin, tilt the monitor forward and bring the terminals into view. Two people are required
to hold the monitor and insert D-sub 15 pin safely. Be careful not to damage the panel.
Example 2: Connecting to DVD player
HDMI Cable
Power On...
Connect the plug into the wall socket after all other
connections are completed.
CAUTION
Ensure that both ends of the power cord are easily
accessible.
The Main Power Switch is factory set to On
(activated), therefore after you connect the plug into
the wall socket, the color of the indicating lamp must
turn Green and the Illumination Lamp turns Blue.The
image will display on screen.
Once the Main Power switch is on, you can turn On/
Off by pressing the Power (On/Off) button on the
remote control.
If no equipment is connected to the Monitor the color
of the indicating lamp turns to Orange, and the
Illumination Lamp turns off indicating Power Save
Mode.
Tilt Forward
D-Sub 15
*
Audio Cable
Power Cord
*D-sub 15 and Audio cables are not included.
Monitor
Rear
Panel
Illumination Lamp
12
*
HDMI Cable
AC
Wall
Socket
Indicating Lamp
Main Power Switch
(on the underside)
Front
Rear
D8MW
Advertisement
Table of Contents
