Table of Contents
Advertisement
Important Safety Instructions
1.
Read Instructions - All the safety and operating
instructions should be read before the product
is operated.
2.
Retain Instructions - The safety and operating
instructions should be retained for future
reference.
3.
Heed Warnings - All warnings on the product
and in the operating instructions should be
adhered to.
4.
Follow Instructions - All operating and use
instructions should be followed.
5.
Cleaning - Unplug the product from the wall outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a dry cloth for cleaning.
6.
Attachments - Only use attachments/accessories
speci ed by the manufacturer.
7.
Water and Moisture - Do not use the product near
water, for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, etc.
8.
Accessories - Do not place the product on an
unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold
with the product. Any mounting of the product
should follow the manufacturer's instructions and
should use a mounting accessory recommended
by the manufacturer.
combination should be moved with care. Quick
stops, excessive force, and uneven surfaces
may cause the product and cart combination to
overturn.
9.
Ventilation - Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa,
rug, or other similar surface. The product should
not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.
10.
Power Sources - The product should be operated
only from the type of power source indicated on
the marking label. If you are not sure of the
type of power supply to your home, consult your
The product and cart
appliance dealer or local power company.
11.
Power Cord Protection - Power cords should be
routed so that they are not likely to be walked
on or pinched by items placed upon or against
them, paying particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from the appliance.
12.
Lightning - For added protection for the product
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect
the antenna or cable system. This will prevent
damage to the product due to lightning and
power-line surges.
13.
Power Lines - An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
14.
Overloading - Do not overload wall outlets and
extension cords as this can result in a risk of re
or electric shock.
15.
Object and Liquid Entry - Never push objects of
any kind into the product through any openings
as they may touch dangerous voltage points or
short-out parts that can result in a re or electric
shock. Never spill liquid of any kind on the
product.
16.
Servicing - Do not attempt to service the
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to quali ed service
personnel.
17.
Repairing - Unplug the product from the wall
outlet and refer servicing to quali ed service
personnel under the following conditions:
a.
When the power cord or plug is damaged.
b.
If liquid has been spilled, or objects have
fallen into the product.
c.
If the product has been exposed to rain or
water.
d.
If the product does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by
the operating instructions as an improper
3
Advertisement
Table of Contents
