Advertisement
Warning and Notice
Safety Precautions
•
Some electronic devices may be susceptible to electromagnetic interference. Locate the device away
from TV set, radio and other electronic equipment to avoid electromagnetic interference.
•
The device may interfere with medical devices like hearing aids and pacemakers. Consult a physician or
the manufacturer of the medical device before using it.
•
Please keep yourself at least 20 centimeters away from your device.
•
Do not use your device in dangerous environments such as oil terminals or chemical factories where
there are explosive gases or explosive products being processed.
•
Please use original accessories or accessories that are authorized by ZTE. Unauthorized accessories
may affect the device performance, damage the device or cause danger to you.
•
Do not attempt to dismantle the device. There are no user-serviceable parts.
•
Do not allow the device or accessories to come into contact with liquid or moisture at any time. Do not
immerse the device in any liquid.
•
Do not place objects on top of the device. This may lead to overheating of the device.
•
The device must be placed in awell-ventilated environment for use.
•
Do not expose the device to direct sunlight or store it in hot areas. High temperature can shorten the life
of electronic devices.
•
Do not allow children to play with the device or power adapter.
•
The device is for indoor use only. Do not use the device outside.
•
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
Cleaning and Maintaining
•
Use an antistatic cloth to clean the device. Do not use chemical or abrasive cleanser as these could
damage the plastic case. Turn off your device before you clean it.
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiated radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Radio Frequency (RF) Exposure
Your device contains a transmitter and a receiver. When it is ON, it receives and transmits RF energy.
When you communicate with your device, the system handling your connection controls the power level at
which your device transmits.
Important safety information regarding radiofrequency radiation (RF) exposure. To ensure compliance with
RF exposure guidelines the device must be used with a separation from the body. Failure to observe these
instructions could result in your RF exposure exceeding the relevant guideline limits.
21
23
•
Use the device within the temperature range of -20℃~+55℃, and the storage temperature range is -40℃
~+70℃. The humidity range is 5%~95%.
•
Do not use your device during a thunderstorm. Remove the mains power pack from the wall socket.
Limited Warranty
This warranty does not apply to defects or errors in the product caused by:
i.
Reasonable abrasion.
ii.
End users' failure to follow ZTE's installation, operation or maintenance instructions or procedures.
iii.
End users' mishandling, misuse, negligence, or improper installation, disassembly, storage, servicing
or operation of the product.
iv.
Modifications or repairs not provided by ZTE or a ZTE-certified individual.
v.
Power failures, surges, fire, flood, accidents, and actions of third parties or other events outside ZTE's
reasonable control.
vi.
Usage of third-party products or usage in conjunction with third-party products if such defects are due
to the combined usage.
vii.
Any other cause beyond the range of normal usage intended for the product.
End users have no right to reject or return the product, or receive a refund for the product from ZTE under
the above-mentioned situations.
This warranty is end users' sole remedy and ZTE's sole liability for defective or nonconforming items, and is
in lieu of all other warranties, expressed, implied or statutory, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose, unless otherwise required under the
mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages
resulting from or arising out of or in connection with using of this product, no matter whether or not ZTE had
been advised, knew or should have known of the possibility of such damages, including, but not limited to
lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime
cost.
The transmitter is using external antenna that operate at 20cm or more from nearby persons.
The FCC grant can be found under the Display Grant section of
searching on FCC ID: SRQ-MF289F.
IC Notice
This radio transmitter (identify the device by certification number, or model number if Category II) has been
approved by Industry Canada to operate with the antenna types listed below with the maximum permissible
gain and required antenna impedance for each antenna type indicated. Antenna types not included in this
list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with
this device.
Immediately following the above notice, the manufacturer shall provide a list of all antenna types approved
for use with the transmitter, indicating the maximum permission antenna gain (in dBi) and required
impedance for each.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of
the device.
This Class B digital apparatus complies with Canadian ICES-003.
IC: 5200E-MF289F
22
http://www.fcc.gov/oet/fccid
after
24
Advertisement
