Wolf Pro Ventilation Hood Liners - Wolf L342212 Installation Manual

Wolf Pro Ventilation Hood Liners

Pro Hood Liner Installation
IMPORTANT NOTE: This installation must be completed
by a qualified installer or Wolf factory certified service.
Read this entire installation guide prior to installation and
save for the local inspector's reference. The homeowner
should keep this installation guide for future reference.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency and amperage ratings are listed on the
product rating plate.
Record the model and serial numbers before installing the
hood liner. Both numbers are listed on the product rating
plate, located inside the left wall of the hood liner shell.
Refer to the illustration below.
RATING PLATE
Location of rating plate
(inside liner).
All manuals and user guides at all-guides.com
Wolf Pro Hood Liner
Model Number
Serial Number
3
wolfappliance.com/specs