Sony Handycam DCR-HC47E Operating Manual page 67

The BACK LIGHT function does not
function.
• In the following settings, the BACK
LIGHT function is canceled.
– [MANUAL] of [EXPOSURE]
– [SPOT METER]
• The BACK LIGHT function does not work
during Easy Handycam operation (p. 17).
A vertical band appears when
recording candlelight or electric light
in the dark.
• This occurs when the contrast between the
subject and the background is too high.
This is not a malfunction.
A vertical band appears when
recording a bright subject.
• This phenomenon is called the smear effect.
This is not a malfunction.
Tiny spots in white, red, blue, or
green appear on the screen.
• The spots appear when you are recording in
[AUTOSLW SHTR], [SLOW SHUTTR],
[SUPER NSPLUS], or [COLOR SLOW S].
This is not a malfunction.
The color of the picture is not
correctly displayed.
• Deactivate the NightShot plus function
(p. 20).
The screen picture is bright, and the
subject does not appear on the
screen.
• Deactivate the NightShot plus function
(p. 20), or cancel the BACK LIGHT
function (p. 21).
The screen picture is dark, and the
subject does not appear on the
screen.
• Press and hold DISP/BATT INFO for a few
seconds to turn on the backlight (p. 12).
Undesirable flicker occurs.
• This anomaly may occur when recording
pictures under the discharge tube, such as a
fluorescent lamp, sodium lamp, or mercury
lamp, with [PORTRAIT] or [SPORTS].
This is not a malfunction.
Black bands appear when you
record a TV screen or computer
screen.
• Set [STEADYSHOT] to [OFF] (p. 37).
[The lens cover might be closed.
Check the cover.] appears on the
screen when the lens cover is open.
• There is not enough light, or the lens is
covered by your finger or other object.
You cannot use [SUPER NSPLUS].
• The NIGHTSHOT PLUS switch is not set
to ON (p. 20).
[COLOR SLOW S] does not operate
correctly.
• [COLOR SLOW S] may not operate
correctly in total darkness. Use NightShot
plus or [SUPER NSPLUS].
Playback
Refer also to the "Cassette tapes/ "Memory
Stick Duo"" section (p. 65).
You cannot play back a tape.
• Slide the POWER switch repeatedly to turn
on the PLAY/EDIT lamp (p. 22).
• Rewind the tape (p. 22).
67
Continued ,