Sony Handycam DCR-SX45E Handbook page 79

Editing movies/photos on your
camcorder
Unable to edit.
Unable to edit because of the condition of the

image.
Movies cannot be added in the Playlist.
There is no free space in the recording media.

You can add no more than 99 movies to a

Playlist. Erase unnecessary movies from the
Playlist (p. 43).
You cannot add photos in the Playlist.

A movie cannot be divided.
A movie that is too short cannot be divided.

A protected movie cannot be divided.

A photo cannot be captured from a
movie.
The recording media where you want to save

photos is full.
Dubbing/Connecting to other
devices
You cannot hear the sound on the TV
connected to your camcorder.
When you are using the S VIDEO plug,

make sure the red and white plugs of the A/V
connecting cable are connected (p. 54).
The aspect ratio of the playback is not
correct when connecting your camcorder
to the TV.
Set [TV TYPE] according to your TV (p. 72).

The top, bottom, right, and left edges
of images are trimmed slightly on a
connected TV.
The LCD screen of your camcorder can

display recording images across the entire
screen (full pixel display). However, this may
cause slight trimming of the top, bottom, right,
and left edges of images when played back on
a TV which is not compatible with full pixel
display.
It is recommended you record images using

the outer frame of [GUIDEFRAME] (p. 66)
as a guide.
Images are not dubbed correctly.
The A/V connecting cable is not connected

properly. Make sure to connect the cable to the
input jack of another device (p. 54).
Connecting to a Computer
"PMB" cannot be installed.
Check the computer environment or

installation procedure required to install
"PMB. "
"PMB" does not work correctly.
Quit "PMB" and restart your computer.

The camcorder is not recognized by the
computer.
Disconnect devices from the USB jack of the

computer other than the keyboard, mouse,
and your camcorder.
Disconnect the USB cable from the computer

and your camcorder, and restart the computer,
then connect the computer and your
camcorder again in the correct order.
Examples of functions that cannot
be used simultaneously
The following list shows examples of
unworkable combinations of functions and
menu items.
Cannot use
BACK LIGHT
GB

Because of following settings
[SPOT MTR/FCS], [SPOT
METER], [MANUAL]
in [EXPOSURE],
[FIREWORKS]