Table of Contents
Advertisement
Using the built-in
projector
(HDR-PJ710VE/
PJ720E/PJ740VE/PJ760E/
PJ760VE)
You can use a flat surface such as a wall as
a screen to view recorded images using the
built-in projector.
Notes
The LCD screen turns off while an image is
being projected. Use the power zoom lever/
PHOTO button or wireless remote commander
to operate the camcorder.
1
Face the projector lens towards a
surface, such as a wall, and then
press PROJECTOR.
2
When the operating guide
screen appears, select [Project].
This screen appears the first time you use
the built-in projector.
3
Adjust the focus of the projected
image using the PROJECTOR
FOCUS lever.
PROJECTOR FOCUS lever
The projected image is larger when the
distance between your camcorder and the
reflecting surface increase.
It is recommended that you place the
camcorder about 0.5 m (1.6 feet) or further
away from the surface that the images are
to be projected onto.
4
Move the power zoom lever to
select the image you want to
play, then press PHOTO to begin
playback.
Use the power zoom lever to move the
selection frame that appears on the LCD
screen and press the PHOTO button to
start playing the framed item.
For details on playback, see page 30.
When you use the wireless remote
commander, use /// to move the
selection frame and press ENTER to start
playing the framed item.
To turn off the projector, press
PROJECTOR.
Power zoom lever
PHOTO button
GB
1
Hide quick links:
Advertisement
Table of Contents
