Table of Contents
Advertisement
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE
to turn on the
(p. 23).
Your camcorder is recording the image you
have just shot on the recording media. You
cannot make new recording during this
period.
The recording media is full. Delete
unnecessary images (p. 42).
Total number of movie scenes or photos
exceeds the recordable capacity of your
camcorder (p. 64, 65). Delete unnecessary
images (p. 42).
The camcorder stops operating.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
"PlayMemories Home" cannot be installed.
Check the computer environment or
installation procedure required to install
"PlayMemories Home. "
"PlayMemories Home" does not work
correctly.
Quit "PlayMemories Home" and restart your
computer.
The camcorder is not recognized by the
computer.
Disconnect devices from the USB jack of the
computer other than the keyboard, mouse,
and your camcorder.
GB
(Movie) or
(Photo) lamp
Disconnect the Built-in USB Cable from the
computer and your camcorder, and restart
the computer, then connect the computer and
your camcorder again in the correct order.
When both the Built-in USB Cable and the
USB jack of the camcorder are connected
to the external devices at the same time,
disconnect one that is not connected to a
computer.
Hide quick links:
Advertisement
Table of Contents
