Cleaning The Appliance; Removing The Fittings - Siemens KF96R Series User Manual

en Cleaning and servicing
Place ice packs (if available) onto
the food.
Remove all fittings and accessor-
3.
ies from the appliance.
→ Page 28
Remove the telescopic rails.
4.
→ Page 30
Remove the refrigerator compart-
5.
ment glass plate. → Page 31
Remove the shelf above the pull-
6.
out container. → Page 32
15.2 Cleaning the appliance
WARNING
Risk of electric shock!
An ingress of moisture can cause an
electric shock.
Do not use steam- or high-pres-
▶
sure cleaners to clean the appli-
ance.
Liquid in the lighting or in the con-
trols can be dangerous.
The rinsing water must not drip
▶
into the lighting or controls.
ATTENTION!
Unsuitable cleaning products may
damage the surfaces of the appli-
ance.
Do not use hard scouring pads or
▶
cleaning sponges.
Do not use harsh or abrasive de-
▶
tergents.
Do not use cleaning products with
▶
a high alcohol content.
Do not use stainless-steel cleaning
▶
agents on the outside of the appli-
ance.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
Never clean fittings and accessory
▶
in the dishwasher.
Prepare the appliance for cleaning.
1.
→ Page 27
28
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings and install the ap-
4.
pliance components.
Electrically connect the appliance.
5.
Putting the food into the appliance.
6.
15.3 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Lift the shelf
▶
Removing the extendable bottle
shelf
Pull out the bottle storage compart-
1.
ment drawer as far as it will go.
Pull out the extendable bottle shelf
2.
as far as it will go.
and remove it ⁠ .